Oki 5700 User Manual Page 58

  • Download
  • Add to my manuals
  • Print
  • Page
    / 134
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 57
English
4-10 Chapter 4
of the last telephone number called is also possible at any time by pressing
the REDIAL key on the control panel.
Faxing to Multiple Locations
1
Load the document(s).
2
Select a location (
see Table 4-6
).
3
Press the ENTER key.
4
Repeat steps 2 and 3 above until all groups and / or individual locations
for the broadcast have been entered.
5
Press the START key to begin scanning. Transmission will commence
after scanning is completed.
Note:
If confirming locations, two options are available: by report
printing, or by display. To return to scan / confirm mode, press
STOP twice.
Message Confirmation Report (MCF
The machine can be set to print out a MCF automatically after single and/
or multiple-location transmissions. If not set in the automatic mode,
MCF’s can still be printed at a later time. Please refer to the chapter
Reports for more detailed information.
Table 4-6: Dialling to multiple locations
To Dial Using Do This
One-Touch key Press the One-touch key
2 or 3-digit dial Press SPEED DIAL key, then enter Speed Dial number using the
numeric keypad.
Search Press the SPEED DIAL key, then enter the first character using a
one-touch key.
Numeric keypad Dial as if using a telephone. If a mistake is made, press the
key to
move the cursor back and re-enter the correct number (the DEL key
deletes the character at the current cursor position, or the CLEAR
key deletes all characters from the current cursor position to the
end).Up to 10 locations can be entered in this way.
If the ISDN G4 board is installed, you will be prompted to select
either G3 or G4 transmission. Use the
and
keys to make your
selection and press ENTER.
Group dialling Press the SPEED DIAL key, then press the # key and enter the
group number using the numeric keypad. Press ENTER to confirm
the displayed group.
Page view 57
1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 133 134

Comments to this Manuals

No comments