Oki 5700 User Manual download pdf (Page 46)

English

3-18 Chapter 3

Message Confirmation Report Options

The Message Confirmation Report (MCF) is a very convenient feature

often used on a daily basis to ensure that faxes were sent or arrived at the

proper destinations. The following functions are for setting MCF

parameters.

MCF. (Single-Loc):

Set in the ON state, a MCF will be printed out

automatically for single location transmissions. When set to OFF, no

report will be printed out. Speed access no. 70.

MCF. (Multi-Loc):

Set in the ON state, single and miltiple location

transmission MCF’s will be printed automatically. When set to OFF, no

report will be printed out. Speed access no. 71.

Image in MCF. :

Set in the ON state, a portion of the first page of the fax

transmitted will be printed in the MCF. When set to OFF, no image will be

printed in the report. Speed access no. 72.

Err. Report (MCF.):

Set in the ON state, an error report is automatically

printed if a fax communication does not end with the service code 0000

(indicates a successful transaction). When set to OFF, the report is not

printed out automatically. Speed access no. 73.

ISDN G4 Options

If the machine comes installed with an ISDN G4 board, the following

parameters must be set prior to beginning fax operations. Additionally, the

incorporation of the ISDN board also disables a number of the parameters

set for analogue operations (see comments with those parameters listed).

ISDN Dial Mode:

This mode is for setting the default communication

method, either G4 or G3, when using the 10-key pad to dial. When set to

G4, communication will automatically take place at G4 if the remote

machine is G4 compatible. Speed access no. 27.

Speech Receive:

Set to ON, this parameter enables the reception of voice

communications from the network. When set to OFF, all voice

communication signals are rejected automatically. Speed access no. 28.

ISDN Terminal ID (TID):

ISDN TID requires the input of up to 3

numeric digits for the country code, 20 numeric digits for the ISDN

subscriber number, and 10 alphabetic characters for the ISDN ID

(subscriber code). Speed access no. 06.

Note:

At least one of these three items must be input for this parameter.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 133 134

Comments to this Manuals

No comments

Oki 5700 User Manual Page 46

Comments to this Manuals

Related products and manuals for Faxes Oki 5700