Oki 5700 User Manual download pdf (Page 44)

English

3-16 Chapter 3

MF (Tone) Duration*:

If the machine is set to MF, this function controls

the duration of the tones used for dialling (tone duration varies by

country). Available settings are 75, 85 and 100ms. Speed access no. 49.

PBX Line*:

This function must be turned on if the machine is connected

to a PBX. When the function is activated and the access digit function

programmed, the machine will recognise the access digit in the PBX to

obtain an outside line. After dialling the access digit, the machine will

pause to wait for an outside line before dialling the remainder of the

telephone number. Available settings are ON an OFF. Speed access no. 50.

Flash/Earth/Normal*:

If the machine is connected to a PBX, this

function sets the method of switching between the flash and earth modes

for PBX lines. Available settings are Normal, Flash and Earth. Speed

access no. 51.

Dial Prefix*:

If the machine is connected to a PBX, this function is used

to inform the machine the access number to use for obtaining an outside

line from the PBX. Up to four digits can be input for the prefix number.

Speed access no. 52.

* Choice cannot be made when ISDN G4 board is installed.

Incoming Call Parameters

Incoming Ring:

This function offers a soft ringing sound through the

machine’s built-in speaker when a call is received. If the function is set to

OFF, the machine will not emit a ringing sound to announce incoming

calls. If the function is set to ON, the machine will only emit a ringing

sound when the machine is set to TEL (manual receive mode) or Ring

Response is set to 5-20sec (except 1 ring). When set to DRC (Distinctive

Ring feature), the machine will emit a ringing sound for each incoming

call with the same tone even if the Distinctive Ring parameter is set to ON.

Available settings are ON, OFF and DRC. Speed access no. 60.

Remote Receive:

This function allows remote switching from telephone

to fax mode to receive an incoming fax. If you answer an incoming call on

a connected external telephone and hear a remote fax machine, you can

switch your fax machine into fax receive mode without having to press the

START key. Use the keypad of the optional handset or external telephone

to enter the remote receive number programmed into the machine.

Available settings are: OFF, 00, 11, 22, 33, 44, 55, 66, 77, 88, 99, ** or ##.

Speed access no. 61.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 133 134

Comments to this Manuals

No comments

Oki 5700 User Manual Page 44

Comments to this Manuals

Related products and manuals for Faxes Oki 5700