Oki MC160n User Manual download pdf (Page 79)

79 Media Handling

 Dusty

 Wet (or damp)

" Keep media between 15% and 85% relative humidity. Toner does not

adhere well to moist or wet media.

 Layered

 Adhesive

 Folded, creased, curled, embossed, warped, or wrinkled

 Perforated, three-hole punched, or torn

 Too slick, too coarse, or too textured

 Different in texture (roughness) on the front and back

 Too thin or too thick

 Stuck together with static electricity

 Composed of foil or gilt; too luminous

 Heat sensitive or cannot withstand the fusing temperature (180°C [356°F])

 Irregularly shaped (not rectangular or not cut at right angles)

 Attached with glue, tape, paper clips, staples, ribbons, hooks, or buttons

 Acidic

Thick Stock

Paper thicker than 90 g/m

(24 lb bond) is referred to as thick stock. Test all thick

stock to ensure acceptable performance and to ensure that the image does not

shift.

You can print continuously with thick stock. However, this could affect the media

feed, depending on the media quality and printing environment. If problems

occur, stop the continuous printing and print one sheet at a time.

Capacity Tray 1 Up to 50 sheets, depending on their thick-

ness

Tray 2 Not supported

Orientation Face up

Driver

Media Type

Thick Stock 1

Thick Stock 2

Weight

Thick Stock 1: 91 to 163 g/m

(25 to 43.5 lb bond)

Thick Stock 2: 164 to 209 g/m

(43.6 to 55.6 lb bond)

Duplexing Not supported

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 267 268

No comments

Oki MC160n User Manual Page 79