Oki MC160n User Manual Page 55
- Page / 268
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
55 Control Panel and Configuration Menu
SNMP Setting DISABLE / ENABLE
Select whether or not to enable SNMP.
SPEED/DUPLEX Setting AUTO / 10BASE-T FULL /
10BASE-T HALF /
100BASE-TX FULL /
100BASE-TX HALF
Specifies the transmission speed for the
network and the transmission method for
bi-directional transmission.
E-MAIL
SETTING
SMTP Setting DISABLE / ENABLE
Select whether to enable or disable
e-mail transmission operations for this
machine.
SENDER NAME Specify the name of the E-mail sender
(up to 20 characters) used for network
scanning.
The default setting is “OKI-MC160n”.
E-MAIL ADDRESS Specify the E-mail address (up to 64
characters) of the E-mail sender used for
network scanning.
The default setting is blank.
DEFAULT SUBJECT Specify the subject (up to 20 characters)
of the E-mail message used for network
scanning.
The default setting is “From
OKI-MC160n”.
SMTP SERVER
ADDR.
Specify the IP address or host name (up
to 64 characters) for the SMTP server.
The default setting is “0.0.0.0”.
SMTP PORT NO. Setting 1 to 65535 (Default: 25)
Specify the port number communicating
with the SMTP server.
- User Guide 1
- MC160n MFP 1
- Copyright Information 2
- Contents 3
- 4 Contents 4
- 5 Contents 5
- 6 Contents 6
- 7 Contents 7
- 8 Contents 8
- 1Introduction 9
- Space Requirements 10
- 11 Introduction 11
- 12 Introduction 12
- Part Names 13
- 14 Introduction 14
- Rear View 14
- 15 Introduction 15
- Front View with Options 15
- 16 Introduction 16
- Rear View with Options 16
- 17 Introduction 17
- CD Contents 18
- 19 Introduction 19
- Applications 19
- System Requirements 20
- 1Control Panel 21
- About the Control Panel 22
- Display Indications 24
- Main Screen (Scan Mode) 26
- Main Screen (Fax Mode) 29
- Print Screen 32
- PRINTER MODE Menu 33
- TONER REMAINING 34
- T/C CHANGE 34
- REPORT/STATUS Menu 36
- SUPPLIES STATUS 37
- TX/RX RESULT 37
- Configuration Menu Overview 39
- FAX RX OPERATION 40
- REPORTING 40
- SCAN SETTING 40
- MACHINE SETTING Menu 41
- IMAGE REFRESH 42
- DUPLEX SPEED 42
- CALIBRATION 42
- TRAY1 PAPER SETUP Menu 45
- ADMIN. MANAGEMENT Menu 47
- INTERVAL 52
- COPY SETTING Menu 63
- DIAL REGISTER Menu 65
- FAX TX OPERATION Menu 67
- FAX RX OPERATION Menu 69
- REPORTING Menu 72
- SCAN SETTING Menu 74
- M IX / TEXT / 75
- 2Media Handling 76
- Print Media 77
- 78 Media Handling 78
- Plain Paper (Recycled Paper) 78
- 79 Media Handling 79
- Thick Stock 79
- 80 Media Handling 80
- OK to use 81
- Printable Area 82
- Loading Media 83
- 1 Remove the dust cover 83
- 84 Media Handling 84
- 5 Install the dust cover 85
- 6 Install the dust cover 87
- 88 Media Handling 88
- 89 Media Handling 89
- Loading Plain Paper 89
- 3 Remove the lid from Tray 2 90
- 6 Reattach the lid to Tray 2 91
- About Duplex Printing 92
- 3 Click OK 93
- Output Tray 94
- Media Storage 95
- Original Media 96
- Documents with binder holes 97
- 1 Lift to open the ADF cover 98
- 3 Gently close the ADF cover 99
- 100 Media Handling 100
- 2Using the 101
- Printer Driver 101
- 102 Using the Printer Driver 102
- Windows Vista 102
- Windows XP/Server 2003 102
- 103 Using the Printer Driver 103
- Windows 2000 103
- Printer Driver Settings 104
- Basic Tab 105
- Layout Tab 106
- Overlay Tab 106
- Watermark Tab 106
- Quality Tab 106
- Version Tab 107
- 3Using the Copier 108
- Making Basic Copies 109
- 110 Using the Copier 110
- Selecting the Document Type 110
- Specifying the Zoom Ratio 111
- Selecting the Media Tray 112
- Setting 2in1 Copying 113
- Setting a Copy Function 114
- 115 Using the Copier 115
- ID Card Copying 115
- 116 Using the Copier 116
- Repeat Copying 116
- 117 Using the Copier 117
- Poster Copying 117
- 118 Using the Copier 118
- 119 Using the Copier 119
- 120 Using the Copier 120
- 4Using the Scanner 121
- Basic Scanning Operation 122
- Windows TWAIN Driver Settings 123
- 124 Using the Scanner 124
- Windows WIA Driver Settings 125
- 126 Using the Scanner 126
- 127 Using the Scanner 127
- Scanning With the Machine 128
- 129 Using the Scanner 129
- Specifying the Data Location 130
- 131 Using the Scanner 131
- 132 Using the Scanner 132
- 133 Using the Scanner 133
- 134 Using the Scanner 134
- 135 Using the Scanner 135
- Searching the Address Book 135
- 136 Using the Scanner 136
- Searching an LDAP Server 136
- 6 Press the Enter key again 137
- 138 Using the Scanner 138
- Registering/Editing Addresses 139
- 140 Using the Scanner 140
- 141 Using the Scanner 141
- 142 Using the Scanner 142
- 143 Using the Scanner 143
- 144 Using the Scanner 144
- 145 Using the Scanner 145
- Selecting the Data Format 146
- 147 Using the Scanner 147
- Selecting the Resolution 147
- Selecting the Scan Mode 147
- Selecting the Scan Density 147
- Setting the Scan Size 148
- Setting the Scan Color 148
- Specifying the Subject 148
- 149 Using the Scanner 149
- 150 Using the Scanner 150
- 5Replacing 151
- Consumables 151
- Replacing Consumables 152
- 153 Replacing Consumables 153
- Replacing a Toner Cartridge 154
- 6 Open the front cover 155
- 156 Replacing Consumables 156
- 157 Replacing Consumables 157
- 158 Replacing Consumables 158
- 15 Close the front cover 159
- 160 Replacing Consumables 160
- 161 Replacing Consumables 161
- 1 Open the scanner unit 162
- 163 Replacing Consumables 163
- 164 Replacing Consumables 164
- 165 Replacing Consumables 165
- 2 Open the scanner unit 166
- 167 Replacing Consumables 167
- 168 Replacing Consumables 168
- 5 Prepare a new fuser unit 169
- 170 Replacing Consumables 170
- 171 Replacing Consumables 171
- 172 Replacing Consumables 172
- 173 Replacing Consumables 173
- 174 Replacing Consumables 174
- 6Maintenance 175
- Maintaining the Machine 176
- CAUTION! 177
- Cleaning the Machine 178
- 180 Maintenance 180
- 182 Maintenance 182
- 183 Maintenance 183
- 1 Open the ADF feed cover 184
- 3 Close the ADF feed cover 184
- 185 Maintenance 185
- 186 Maintenance 186
- 187 Maintenance 187
- 188 Maintenance 188
- 1 Open the duplex door 189
- 3 Close the duplex door 189
- 4 Open the front cover 190
- 191 Maintenance 191
- 6 Close the front cover 192
- 193 Maintenance 193
- 195 Maintenance 195
- 11 Close the scanner unit 196
- 12 Press the Stop/Reset key 196
- 197 Maintenance 197
- 16 Close the front cover 198
- 7Troubleshooting 199
- Introduction 200
- Printing a Configuration Page 201
- Preventing Media Misfeeds 202
- Understanding the Media Path 203
- Clearing Media Misfeeds 203
- 205 Troubleshooting 205
- 207 Troubleshooting 207
- 4 Remove any missed media 209
- 210 Troubleshooting 210
- 211 Troubleshooting 211
- 212 Troubleshooting 212
- 213 Troubleshooting 213
- 3 Reattach the dust cover 214
- 4 Press the Start key 214
- 215 Troubleshooting 215
- 3 Remove any missed paper 216
- 8 Reinsert Tray 2 217
- 218 Troubleshooting 218
- 3 Lift to open the ADF cover 219
- 4 Remove any misfed media 220
- 5 Close the ADF cover 220
- 6 Close the ADF feed cover 220
- 1 Open the duplex cover 221
- 3 Close the duplex cover 222
- 223 Troubleshooting 223
- 224 Troubleshooting 224
- 225 Troubleshooting 225
- Solving Other Problems 226
- 227 Troubleshooting 227
- 228 Troubleshooting 228
- 229 Troubleshooting 229
- 230 Troubleshooting 230
- 231 Troubleshooting 231
- 232 Troubleshooting 232
- 233 Troubleshooting 233
- 234 Troubleshooting 234
- 235 Troubleshooting 235
- 236 Troubleshooting 236
- Status Messages 237
- Error Messages 238
- 239 Troubleshooting 239
- 240 Troubleshooting 240
- 241 Troubleshooting 241
- 242 Troubleshooting 242
- 243 Troubleshooting 243
- 244 Troubleshooting 244
- 245 Troubleshooting 245
- Service Messages 246
- 3Installing 247
- Accessories 247
- Tray 2 (Lower Feeder Unit) 249
- Installing Tray 2 250
- 6 Load paper into Tray 2 251
- 252 Installing Accessories 252
- Duplex Option 253
- 3 Prepare the attachment 254
- WARNING! 255
- 256 Installing Accessories 256
- 4 Prepare the duplex option 257
- 5 Install the duplex option 258
- 6 Open the duplex cover 259
- Appendix 260
- Technical Specifications 261
- 262 Appendix A 262
- 263 Appendix A 263
- 264 Appendix A 264
- User-Replaceable 264
- Service-Replaceable 264
- Entering Text 265
- 266 Appendix A 266
- Entering Names 266
- Entering E-mail Addresses 266
- Changing Input Mode 267
- Inputting Example 267
- ACK key 268
Related products and manuals for Copiers Oki MC160n
Copiers Oki B4545 User Manual
(2 pages)
(2 pages)
Copiers Oki MC160n User Manual
(280 pages)
(280 pages)
© 2020, manymanuals.com. All rights reserved. | 0.903 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals