OKI CX2633 User Manual download pdf (Page 117)

Maintenance > 117

6. Lift the right-hand end of the cartridge and then draw the cartridge to the right to

release the left-hand end as shown, and withdraw the toner cartridge out of the MFP.

7. Put the cartridge down gently onto a piece of paper to prevent toner from marking

your furniture.

8. Remove the new cartridge from its box but leave its wrapping material in place for

the moment.

9. Gently shake the new cartridge from end to end several times to loosen and

distribute the toner evenly inside the cartridge.

10. Remove the wrapping material and peel off the adhesive tape from the underside of

the cartridge.

11. Holding the cartridge by its top centre with the colored lever to the right, lower it

into the printer over the image drum unit from which the old cartridge was removed.

CAUTION!

The green image drum surface is very delicate and light sensitive.

Do not touch it and do not expose it to normal room light for more

than 5 minutes. If the toner cartridges need to be out of the MFP

for longer than this, please lower the top cover. Never expose the

drum to direct sunlight or very bright room lighting.

1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 179 180

No comments

OKI CX2633 User Manual Page 117