OKI CX2633 User Manual download pdf (Page 110)

Operation > 110

Job Programs

If you have a routine copy, fax or scan job that you perform on a regular basis, you can

program the steps into your MFP and create a “short cut” allowing you to perform the steps

at the touch of a button. You can create six short cuts using the Job Program function.

Creating a Job Program

To register a short cut:

1. Press the Job Program button on the control panel to prompt the Job Programs

screen.

2. Select a job number you wish to associate to your program.

3. Select Yes to continue, or No to exit without saving.

4. Key in the steps you wish to program; for example if you wish to program a copy job

that is double-sided, A4(SEF) scan size and the output is 20 copies:

(a) Press the Copy button on the control panel.

(b) Press the Others button on-screen.

(d) Press the 1->2 sides button on-screen.

(e) Press the Enter button on-screen.

(f) Press the Scan Size button on-screen.

(g) Press the A4(SEF) button on-screen.

(h) Press the Enter button on-screen.

(i) Press the Close button on-screen.

(j) Using the numerical keypad, type in 20.

5. Press the Job Programs button on the control panel.

6. Using the on-screen keypad type in an appropriate title for the program.

7. Press the Enter button on-screen to complete the registration.

NOTE

Maximum of 60 steps per program; selecting or pressing a button counts as

one step.

It is a good idea to write down the steps to be performed beforehand as every

keystroke/button press is programmed.

NOTE

You cannot edit the steps within a program, if you wish to change them then

you must reprogram the job number.

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 179 180

No comments

OKI CX2633 User Manual Page 110