Oki 390 User Manual download pdf (Page 28)

ML390/391 Turbo Printer Handbook 21

Switching Paper Paths

To switch from continuous-form feed from the rear or bottom (optional push or pull

tractor installed) of the printer to single-sheet feed from the top:

1. Tear off printed pages.

2. Press PARK button.

3. Swing wire guide up into paper separator, then pivot separator to upright posi-

tion.

4. Move paper lever to position marked “TOP”.

5. Load single sheet paper into paper separator.

To switch from top feed to continuous-form tear or bottom (optional push or pull

tractor installed) feed:

1. Make sure no sheet is in paper path (press FF/LOAD to remove single sheet from

path).

2. Lower paper separator to continuous forms position and swing wire guide over

onto pull-up roller assembly.

3. Move paper lever to position marked “REAR” or “BOT”, as appropriate.

4. Press FF/LOAD button. Continuous-form paper will advance into print position.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 130 131

No comments

Oki 390 User Manual Page 28