Oki 390 User Manual download pdf (Page 83)

76 Appendix B: Menu Selections

Proportional Spacing. No (factory default) or Yes. Change to Yes to engage propor-

tional spacing of characters.

Protocol. Appears only if optional Serial Interface is installed. Selects the type of pro-

tocol your system uses: Ready/Busy (factory default) or X-On/X-Off.

Receive Buffer Size. 8K (factory default), 1 Line, or 23K. Selects the amount of memory

devoted to holding received data. Choosing 1 Line will tie up your computer during

printing, but if you about the print job the printer will stop printing much sooner.

Reset Inhibit. No (factory default) or Yes. Change to Yes if you want your printer to

ignore the reset command sent by software. This will prevent your software reset

command from changing the settings you have made through the front panel con-

trols or through printer commands. If you engage this feature, don’t forget that it will

also prevent your software from clearing out existing settings when you finish print-

ing one document and switch to another.

Serial Data 7/8 Bits. Appears only if optional Serial Interface is installed. 8 Bits (fac-

tory default) or 7 Bits. Change to 7 bits if your system uses a 7-bit data format.

SI Select Pitch (10 CPI). IBM mode only. 17.1 CPI (factory default) or 15 CPI. Sets

what pitch (17.1 or 15 characters per inch) will be engaged when the printer control

panel is set for 10 cpi and the SI command is received.

SI Select Pitch (12 CPI). IBM mode only. 20 CPI (factory default) or 12 CPI. Sets what

pitch (20 or 12 characters per inch) will be engaged when the printer control panel is

set for 12 cpi and the SI command is received.

Size. Choose Single (factory default) or Double width and height printing.

Skip Over Perforation. No (factory default) or Yes. Change to Yes if you want the

printer to advance automatically to the next page when it comes within one inch of

the bottom of the page. If your software has its own page formatting controls, keep

this item set to No to avoid interface.

Style. Choose Normal (factory default) or Italics.

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 130 131

No comments

Oki 390 User Manual Page 83