Oki 390 User Manual download pdf (Page 81)

74 Appendix B: Menu Selections

Form Tear-Off. Off (factory default), 500 ms, 1 sec, or 2 sec. Form Tear-Off advances

the paper to the perforation so that you can tear off a sheet of continuous-forms pa-

per. You can turn this feature off, or you can select a time interval for the printer to

wait before advancing the paper.

Graphics. Uni-directional (factory default) or bi-directional. Bi-directional graphics

print faster than uni-directional graphics, but uni-directional graphics have better

print registration. Bi-directional graphics printing can be optimized by adjusting the

Print Registration setting in the Menu.

Graphics Speed. Low (factory default) or High. Choose High speed for faster print-

ing when optimum print quality is not an issue.

I-Prime. Buffer Print (factory default), Buffer Clear, or Invalid. Determines how the printer

will react to the I-Prime signal from your software. With the factory default engaged,

when the printer receives the I-Prime signal, it will print out the contents of the buffer

before resetting. Change the setting to Buffer Clear if you wish the printer to dump the

contents of its buffer immediately upon receiving the I-Prime signal. Change to Invalid if

you want the printer to ignore your software’s I-Prime signal. This will permit you to

enter settings through the printer’s control panel which will not be automatically over-

ridden by the software’s settings when the I-Prime signal is sent.

Language Set. American (factory default), French, German, British, Danish I, Swed-

ish, Italian, Spanish I, Japanese, Norwegian, Danish II, Spanish II, Latin American,

French Canadian, Dutch, or Publisher. Replaces certain symbols with special charac-

ters used in the respective foreign languages.

Line Spacing. 6 lpi (factory default) or 8 lpi. Choose 8 lines per inch for tighter line

spacing, to get more lines per page.

Operator Panel Function. Full Operation (factory default) or Limited Operation.

Change to Limited Operation to deactivate the PRINT QUARITY and CHARACTER

PITCH buttons on the control panel. Then you can control these features only through

your software. This can be useful when several people are using the printer and you

don’t want its settings changed.

Important!

This feature also prevents access to the Menu. To access the Menu, turn

the printer off, then hold down the SEL key while turning on the printer.

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 130 131

No comments

Oki 390 User Manual Page 81