Oki C8800 User Manual download pdf (Page 147)

Replacing consumable items > 147

USER

REPLACEMENT

The fuser is located inside the printer just behind the four image

drum units.

Switch off the printer.

1. Press the cover release and open the printer’s top cover

fully.

2. Identify the fuser handle (1) on the top of the fuser unit.

3. Pull the fuser retaining lever (2) towards the front of the

printer so that it is fully upright.

4. Holding the fuser by its handle (1), lift the fuser straight

up and out of the printer. If the fuser is still warm, place it

on a flat surface which will not be damaged by heat.

WARNING!

If the printer has recently been powered on, some

fuser components will be very hot. Handle the fuser

with extreme care, holding it only by its handle, which

will only be mildly warm to the touch. A warning label

clearly indicates the area. If in doubt, switch the

printer off and wait at least 10 minutes for the fuser

to cool before opening the printer cover.

1 2 ... 142 143 144 145 146 147 148 149 150 151 152 ... 178 179

No comments

Oki C8800 User Manual Page 147