Oki C5250 User Manual download pdf (Page 10)

Paper recommendations> 10

APER

RECOMMENDATIONS

Your printer will handle a variety of print media, including a range

of paper weights and sizes, transparencies and envelopes. This

section provides general advice on choice of media, and explains

how to use each type.

The best performance will be obtained when using standard

75~90g/m² paper designed for use in copiers and laser printers.

Suitable types are:

• Arjo Wiggins Conqueror Colour Solutions 90g/m²;

• Colour Copy by Neusiedler.

Use of heavily embossed or very rough textured paper is not

recommended.

Pre-printed stationery can be used, but the ink must not offset when

exposed to the high fuser temperatures used in the printing

process.

Envelopes should be free from twist, curl or other deformations.

They should also be of the rectangular flap type, with glue that

remains intact when subjected to hot roll pressure fusing used in

this type of printer. Window envelopes are not suitable.

Transparencies should be of the type designed for use in copiers

and laser printers. We strongly recommend Oki transparencies

(Order No. 01074101). In particular, avoid office transparencies

designed for use by hand with marker pens. These will melt in the

fuser and cause damage.

Labels should also be of the type recommended for use in copiers

and laser printers, in which the base carrier page is entirely

covered by labels. Other types of label stock may damage the

printer due to the labels peeling off during the printing process.

Suitable types are:

• Avery White Laser Label types 7162, 7664, 7666 (A4),

or 5161 (Letter);

• Kokuyo A693X series (A4) or A650 (B5).

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 82 83

No comments

Oki C5250 User Manual Page 10