Oki B 6500 User Manual download pdf (Page 23)

B6500 Network Guide> 23

11. Ensure [Protocol] is set to [LPR].

12. Ensure [Queue Name] is lp and [SNMP Status Enabled] is

deselected.

13. Click [OK].

14. Follow on screen instructions to finish installing the printer.

Port 9100

1. Select [Start].[Settings].[Control Panel].[Printers and Other

Hardware].

2. Select [Printers and Faxes].

3. Click [Add Printer] and then click [Next].

4. Select [Local printer attached to this computer], clear the

[Automatically detect and install my Plug and Play printer]

check box, and then click[Next].

5. Select [Create a New Port] and select [Type Standard TCP/IP

Port].

6. Click [Next].

7. [Welcome to the Add Standard TCP/IP Printer Port Wizard]

appears.

8. Click [Next] and provide the following information. Enter

[Printer name or IP address], for example: 172.168.1.31. If

the above IP address is entered, the Port Name will default to

IP_172.168.1.31.

9. Click [Next]. [Additional Port Information Required] is

displayed.

10. Under [Device Type], select [Custom] then [Settings].

11. Ensure [Protocol] is set to [Raw].

12. Ensure [Port Number] is 9100 and [SNMP Status Enabled] is

deselected.

13. Click [OK].

14. Follow the instructions on the screen to finish installing the

printer.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 61 62

No comments

Oki B 6500 User Manual Page 23