Oki B 6500 User Manual download pdf (Page 13)

B6500 Network Guide> 13

6. Press the <S> or <T> buttons to toggle between Automatic

and Manual, select manual. Press <SELECT> to save the

selection

7. Press the <S> or <T> buttons to move through the

submenus until the text “IP Address” is shown on the first

line of the display.

8. Press the <X> button to enter the submenu

9. The first set of numbers blinks. Press the <S> or <T>

buttons to scroll to the desired number. Press the <X>

button to save the current set of numbers and move to the

next set. Repeat the procedure for each set of numbers.

When the last set of numbers is set, press <SELECT> to

save the IP address.

10. Repeat steps 7 through 9 to set the Subnet Mask.

11. Repeat steps 7 through 9 to set the Gateway Address.

RINTER

ETUP

USING

ROWSER

If the printer is connected to the network using TCP/IP, its settings

can be configured using a Web browser such as Internet Explorer or

FireFox. Refer to the relevant manuals for details on how to launch

and use the browser.

Set the browsers address to the IP address found in the prior

section.

The network addresses used in this manual are shown as examples

only. Use the address found in the prior section.

To apply configuration changes using a Web browser, select the

Administrator Login. You will be prompted for a username and

password. The username is [root] and the default password is the

last six digits of the Ethernet MAC address. The MAC address can be

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 61 62

No comments

Oki B 6500 User Manual Page 13