OKI MB260 Specifications download pdf (Page 23)

MB260

- 19 -

3 - Copy

2 Enter the desired number of copies and confirm

with the OK button.

3 Choose the paper tray AUTOMATIC or MANUAL

with the buttons  or , then confirm with the OK

button.

4 Choose the copying option ID CARD with the

buttons  or  and confirm with the OK button.

5 Choose the resolution depending on the desired

printing quality AUTO, TEXT, QUALITY TEXT or

PHOTO with the buttons  or , then confirm with

the OK button. For optimal results with ID

documents, select the PHOTO resolution.

6 Adjust the contrast level with the buttons  or ,

then confirm with the OK button.

7 Adjust the desired brightness level with the buttons

 or , then confirm with the OK button.

8 Choose the paper type NORMAL, THICK with the

buttons  or , then confirm with the OK button.

The LCD screen displays the following message:

9 Place your identity card or any other official

document against the glass of the flatbed scanner,

as shown below:

10 Press the OK button.

The document is scanned then the LCD screen

displays the following message:

11 Turn your document over then confirm with the

OK button.

The machine prints out a copy of your document.

Special setup for the copying

Setups done through this menu become the device

default setups after you confirm.

Resolution setup

The RESOLUTION parameter allows you to setup the

photocopy resolution.

 841 - ADVANCED FCT/COPY/RESOLUTION

1 Press , enter 841 using the keypad.

2 Choose the resolution with the buttons  or 

according to the following table:

3 Confirm your choice by pressing the OK button.

4 Quit this menu by pressing the button.

Zoom setup

The ZOOM parameter allows you to reduce or enlarge an

area of a document by choosing the origin and the zoom

level to apply to the document, from 25 to 400 %.

 842 - ADVANCED FCT/COPY/ZOOMING

1 Press , enter 842 using the keypad.

2 Enter the desired zoom level with the

alphanumerical keypad or choose among

predefined values with the buttons  and .

3 Confirm your choice by pressing the OK button.

4 Quit this menu by pressing the button.

Important

Copying in ID Card mode is only

possible on A4 (original document

size < A5) or Letter (original

document size < Statement) paper

size. Make sure that the selected

paper tray uses the correct paper

size.

PUT ID CARD

THEN OK

TURN UP DOC

THEN OK

Important

When the quality of the printing is

not satisfying, you can proceed to a

calibration (see Calibrate your

scanner, page 23).

Parameter Signification Icon

AUTO Low resolution. none

TEXT

Standard resolution for

documents containing text and

graphics.

QUALITY

TEXT

Optimal resolution for

documents containing text.

PHOTO

Optimal resolution for

documents containing

photographies.

Note

You can also change the resolution by

pressing the button.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 54 55

Comments to this Manuals

No comments

OKI MB260 Specifications Page 23

Comments to this Manuals