OKI MB260 Specifications download pdf (Page 24)

MB260

- 20 -

3 - Copy

Analysis origin setup

If you want, you can change the origin of the scanner.

By entering new values for X and Y in mm (X < 209 and

Y < 280), you move the analysed area as shown on the

diagram below.

 843 - ADVANCED FCT/COPY/ORIGIN

1 Press , enter 843 using the keypad.

2 Select the X and Y coordinates with the buttons 

or .

3 Setup the desired coordinates with the numerical

keypad or the buttons  and .

4 Confirm your choice by pressing the OK button.

5 Quit this menu by pressing the button.

Contrast setup

The CONTRAST parameter allows to choose the

photocopy contrast.

 844 - ADVANCED FCT/COPY/CONTRAST

1 Press , enter 844 using the keypad.

2 Setup the desired level of contrast with the buttons

 and .

3 Confirm your choice by pressing the OK button.

4 Quit this menu by pressing the button.

Brightness setup

The BRIGHTNESS parameter allows to lighten or darken

your output.

 845 - ADVANCED FCT/COPY/BRIGHTNESS

1 Press , enter 845 using the keypad.

2 Setup the desired brightness with the buttons 

and .

3 Confirm your choice by pressing the OK button.

4 Quit this menu by pressing the button.

Paper type setup

 851 - ADVANCED FCT/SCAN. & PRINT/PAPER

TYPE

1 Press , enter 851 using the keypad.

2 Select the paper NORMAL or THICK that you use

with the buttons  and .

3 Confirm your choice by pressing the OK button.

4 Quit this menu by pressing the button.

Paper tray selection

The Automatic selection can have two meanings

depending on the paper format defined on the paper

trays. The following table describes the different cases.

 852 - ADVANCED FCT/SCAN. & PRINT/TRAY

PAPER

1 Press , enter 852 using the keypad.

2 Select the default paper tray to use, AUTOMATIC

or MANUAL, with the buttons  and .

3 Confirm by pressing the OK button.

4 Quit this menu by pressing the button.

Flat-bed analysis margins setup

If you want to, you can offset the lateral margins of the

document to the left or right during the analysis with your

flat-bed scanner.

 854 - ADVANCED FCT/SCAN. & PRINT/

FLATBED MARG

1 Press , enter 854 using the keypad.

2 Setup the left / right margins offsets (by 0.5 mm

steps) with the buttons  and .

3 Confirm by pressing the OK button.

4 Quit this menu by pressing the button.

Left and right printing margins setup

If you want to, you can offset the lateral margins of the

document to the left or right during printing.

 855 - ADVANCED FCT/SCAN. & PRINT/

PRINTER MARG

1 Press , enter 855 using the keypad.

2 Setup the left / right margins offsets (by 0.5 mm

steps) with the buttons  and .

3 Confirm by pressing the OK button.

4 Quit this menu by pressing the button.

Default tray Tray used for copy

Same paper

format in the

trays

AUTOMATIC

Selection between the

main tray and the

manual tray.

MANUAL

The manual tray is

used.

Different

paper format

in the trays

AUTOMATIC The main tray is used.

MANUAL

The manual tray is

used.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 54 55

Comments to this Manuals

No comments

OKI MB260 Specifications Page 24

Comments to this Manuals