OKI PM4410 User Manual

Pacemark 4410Setup Guide59290803

E-8 Pacemark 4410 Setup GuideDocumentation ProvidedSetup GuideThe document you’re holding.OKIcare™ BrochureThis brochure explains the Pacemark 4410 se

E-9Pacemark 4410 Setup GuideInstallingthe PrinterGetting to Know the Pacemark 4410Front ViewRear ViewControl PanelOn/OffSwitchBackAccessDoorRear-Feed

E-10 Pacemark 4410 Setup GuideInstallationRemove the Shipping RestraintsSave the shipping restraints and packing materials in caseyou ever need to shi

E-11Pacemark 4410 Setup Guide4. Remove the red rubber shipping restraints (1) at either end.5. Open the tear bar cover, remove the shipping restraint

E-12 Pacemark 4410 Setup GuideInstall the Ribbon CartridgePrepare the Cartridge1. Swing out the ribbon arms at either end of the cartridge until theys

E-13Pacemark 4410 Setup GuideLoad the Cartridge1. Move the printhead to the ribbon loading area (1).Caution! Make sure the printer is turned off befor

E-14 Pacemark 4410 Setup Guide3. Feed the ribbon behind the printhead (1), threading it around theblack guides (2) on either side of the printhead.Be

E-15Pacemark 4410 Setup GuideInstall the Paper GuideHold the paper guide as shown and place it in the slots on the back ofthe printer.

E-16 Pacemark 4410 Setup GuideConnect to the Computer/NetworkConnecting the Parallel PortThe parallel port is a standard IEEE-1284-compatible,36-pin p

E-17Pacemark 4410 Setup GuideConnecting the Serial PortThe serial port is a standard RS-232C, 25-pin port, withselectable baud rates of up to 38.4 Kbp

Every effort has been made to ensure that the information in this document iscomplete, accurate, and up-to-date. Oki Data assumes no responsibility fo

E-18 Pacemark 4410 Setup GuideConnecting the Ethernet® Port(for Pacemark 4410 with Print Server Pre-Installed)The installed print server is EtherNet 1

E-19Pacemark 4410 Setup Guide3. Secure the cable at both ends, then close the port access cover.4. Plug the RJ45 connector into the EtherNet connector

E-20 Pacemark 4410 Setup GuideConnect to Power1. Attach the power cord to the back of the printer.2. Plug the opposite end into a suitable, grounded o

E-21Pacemark 4410 Setup GuideLoad PaperFront Feed Continuous FormsPaper Specifications: Front FeedMaximum thickness: 0.031 inches (0.79 mm)Type Weight

E-22 Pacemark 4410 Setup Guide2. Pull the front access door out and lift it up into the open position.3. Pull the lock levers forward to unlock the tr

E-23Pacemark 4410 Setup Guide4. Center the supports between the tractors.Left Tractor1. Open the left tractor pin cover, place the paper holes on the

E-24 Pacemark 4410 Setup GuideRight Tractor1. Open the right tractor pin cover, place the paper holes over the pinsand close the cover.2. Fine tune th

E-25Pacemark 4410 Setup GuideThe printer is set to a default front-feed paper width of 13.6inches (136 columns). If you are using 9-inch paper, youmus

E-26 Pacemark 4410 Setup GuideRear Feed Continuous FormsPaper Specifications: Rear FeedMaximum thickness: 0.014 inch (0.36 mm)Type Weight WidthSingle

E-27Pacemark 4410 Setup Guide2. Push on the rear-feed access cover tabs and push the cover back, thenpush on the back access door to release it.3. Pul

OverviewEnglish-1Pacemark 4410 Setup GuideConventions Used in this Setup Guide ...2Safety ...

E-28 Pacemark 4410 Setup Guide4. Center the support between the tractors, then position the paper guide(1) over the support (2).Right Tractor (viewed

E-29Pacemark 4410 Setup GuideLeft Tractor (viewed from the back of the printer)1. Open the tractor cover, place the paper holes over the pins and clos

E-30 Pacemark 4410 Setup Guidedamaging the printhead. Other paper widths must be setusing your software application.To change the menu setting to 8 in

E-31Pacemark 4410 Setup GuideChanging Paper Paths ManuallyTo change paper paths manually:1. Press PARK.The current paper retracts from the paper path.

E-32 Pacemark 4410 Setup GuideRolling ASCII TestTo print a Rolling ASCII test:1. Make sure that continuous form paper at least 9 inches wide isloaded

E-33Pacemark 4410 Setup GuideSelect an EmulationYour printer has three emulations:• Epson® FX• IBM® Proprinter III (PPSII): the factory setting• OKI®

E-34 Pacemark 4410 Setup Guide

E-35Pacemark 4410 Setup GuideThe Pacemark 4410 CDIncluded on the Pacemark 4410 CD:• Pacemark 4410 Printer Drivers• Pacemark 4410 On-Line Registration

E-36 Pacemark 4410 Setup GuideOn-Line User’s GuideThe Pacemark 4410 CD also includes the OKI Pacemark 4410 On-LineUser’s Guide, as well as the Adobe A

E-37Pacemark 4410 Setup GuideThese instructions assume “D” is the location of yourCD-ROM drive.Have your original Microsoft Windows 2000 CD handy. You

E-2 Pacemark 4410 Setup GuideConventions Used in this Setup GuideNotesNotes are set in regular type and contain general information.Caution!Cautions a

E-38 Pacemark 4410 Setup GuideTo Install the On-Line Registration Programin Windows 2000These instructions assume “D” is the location of yourCD-ROM dr

E-39Pacemark 4410 Setup GuideNext, install the On-Line User’s Guide in Windows 2000These instructions assume “D” is the location of yourCD-ROM drive.1

E-40 Pacemark 4410 Setup GuideInstallation for Windows 95/98To Install the Pacemark 4410 Printer Driver onWindows 95/98Minimum System Requirements for

E-41Pacemark 4410 Setup GuideTo Install the On-Line Registration Programin Windows 95/98These instructions assume “D” is the location of yourCD-ROM dr

E-42 Pacemark 4410 Setup GuideTo Install the On-Line Pacemark 4410 User’s Guidein Windows 95/98First, make sure Adobe Acrobat Reader is installedTo vi

E-43Pacemark 4410 Setup GuideTo view the manual from the Pacemark 4410 CD, openAcrobat Reader, click File Open, browse to theManuals\English directo

E-44 Pacemark 4410 Setup GuideTo Install the On-Line Registration Programin Windows NT 4.0These instructions assume “D” is the location of yourCD-ROM

E-45Pacemark 4410 Setup GuideTo Install the On-Line Pacemark 4410 User’s Guidein Windows NT 4.0First, make sure Adobe Acrobat Reader is installedTo vi

E-46 Pacemark 4410 Setup GuideInstallation for Windows 3.1xMinimum System Requirements for Windows 3.1x:CPU: i486DX, 66 MHz (90 MHz pentium recommende

E-47Pacemark 4410 Setup GuideTo Install the On-Line Pacemark 4410 User’s Guidein Windows 3.1xFirst, make sure Adobe Acrobat Reader is installedTo view

E-3Pacemark 4410 Setup GuideYour OKI printer has been carefully designed to give you years of safe,reliable performance. As with all electrical equipm

E-48 Pacemark 4410 Setup Guide

E-49Pacemark 4410 Setup GuidePrint ModePower Light: indicates that printer is turned on.Alarm Light:On: indicates printererror, such as paper out.Blin

E-50 Pacemark 4410 Setup GuideCONFIG Button:With printer off line and nodata being sent:Press to switch betweenpreset menu configurationsCFG1 and CFG2

E-51Pacemark 4410 Setup GuideMenu ModeON-LINE/RESET Button:Press to exit Menu mode.MENU Button:Press to exit Menu mode.With SHIFT, press to print out

E-52 Pacemark 4410 Setup GuideTop of Form (TOF)The red line (1) on the paper shield indicates where the Top of Form(TOF) is located.The TOF must be se

E-53Pacemark 4410 Setup GuideIf you have the Forms Tear-Off feature turned on in the menu,before performing the steps below, press and hold TEAR tomo

E-54 Pacemark 4410 Setup GuideTemporarily Changing the Print Start PositionTo set the print start position lower for one page only: press LF (1) until

E-55Pacemark 4410 Setup GuidePrinterFeaturesPreset Menu ConfigurationsOnce you have made changes in Menu settings, you can save them inone of two pres

E-56 Pacemark 4410 Setup GuideForms Tear-Off FeatureCaution! Never engage Forms Tear-Off when printing onlabels.Forms Tear-Off automatically moves con

E-57Pacemark 4410 Setup GuideAdjusting the Tear-Off PositionThe tear-off positions for the front and rear paper paths are setindependently.To adjust t

E-4 Pacemark 4410 Setup Guide• To avoid damaging the power cord, do not put anything on it or placeit where it will be walked on. If the cord becomes

E-58 Pacemark 4410 Setup Guide

E-59Pacemark 4410 Setup GuideSpecificationsFor additional specifications, see Appendix A in the on-linePacemark 4410 User’s Guide.Electrical Specifica

E-60 Pacemark 4410 Setup Guide

E-61Pacemark 4410 Setup GuideLimitedWarrantyOki Data Americas, Inc. (Oki Data) warrants this printer to be free fromdefect in material and workmanship

E-62 Pacemark 4410 Setup GuideA written receipt for the product, showing the date of purchase, dealer’sname, and serial number of the Pacemark 4410 pr

E-63Pacemark 4410 Setup GuideUnited States CanadaOki Data Americas, Ltd. Oki Data Americas, Ltd.Tel: 1-800-OKI-DATA (1-800-654-3282) Tel: 1-800-OKI-DA

E-64 Pacemark 4410 Setup Guide

E-65Pacemark 4410 Setup GuideFCC/IC/CEStatementsDeclaration of ConformityWe declare here that this device has been tested and found to complywith the

E-66 Pacemark 4410 Setup GuideFederal Communications Commission (FCC)Radio Frequency Interference (RFI) StatementWARNING: This equipment has been test

E-67Pacemark 4410 Setup GuideMaterial SafetyData SheetMSDS No. 58077401for Pacemark 4410Black Ribbon, P/N 40629302For more information, contactOki Dat

E-5Pacemark 4410 Setup GuideIntroductionPacemark 4410 Features• Reliable, heavy-duty- Reliability: 15,000 hours MTBF- Duty Cycle: 35,000 pages/month•

Fire and ExplosionHazard DataFlash Point (Method Used):N/AFlammable Limits, LEL/UEL:N/AExtinguishing Media: Watermist, Foam, Dry powder,CO2 gasSpecial

Pacemark 4410Printed User’s Guide Request FormPacemark Model (check one): ❏ 4410 ❏ 4410 Network VersionSerial No.: __ __ __ __ __ __ __ __ __

E-6 Pacemark 4410 Setup GuideSelect a Location• Firm, level surface capable of supporting approximately 95 lbs.(43 kg)• Clearance to open cover• At le

E-7Pacemark 4410 Setup GuideUnpackingGetting StartedCaution! The Pacemark 4410 printer weighs approximately95 lbs. (43 kg). Be very careful to take ap