Memory DIMM Installation InstructionsDIMM PART NUMBER64MB: 70040901128MB: 70041101256 MB: 70041201512 MB: 70041901
9Check for Proper InstallationGenerate a MenuMap printout and check to be sure that the DIMMs are properly installed.1. Press MENU once or twice until
10Change the Memory Setting in the Driver(s)Windows® Adobe® PostScript® Driver1. Click Start — Settings — Printers. The Printers dialog box opens.2.
11Macintosh® Driver (OSX)1. As of OS 10.1.5, Apple has not enabled Printer Options adjustment. Therefore, this selection is unavailable. Macintosh® D
12Limited WarrantyOki Data Americas, Inc. (Oki Data) warrants this OPTION to be free from defect in material and workmanship and will remedy any such
13WARRANTY PERIOD DESCRIBED ABOVE OF ONE (1) YEAR. Some states do not allow limitations on how long an implied warranty lasts, so the above limitatio
14Oki Data Service Depot InformationUNITED STATESOki Data Americas, Inc.2020 Bishops Gate Blvd.Mt Laurel, NJ 08054Tel: 1-800-654-3282 Fax: 1-856-222-5
15Oki Data Americas, Inc.2000 Bishops Gate Blvd.Mt. Laurel, NJ 08054-4620Tel: (800) 654-3282FAX: (856) 222-5320http://www.okidata.comDIMM Install Guid
1Every effort has been made to ensure that the information in this document is complete, accurate, and up-to-date. Oki Data assumes no responsibility
2Getting StartedThe printers have four sockets for memory DIMM boards. You can expand the printer’s memory up to 1 GB by installing two 512-MB DIMMs.
3Prepare the Printer1. Turn off the printer and unplug the power cord.2. Detach the interface cable from the printer.3. Remove and save the thumbscrew
44. Grasp the control board, loosen it by wiggling it back and forth, and slide it out of the printer.C7100/C7300/C7500C9300/C9500
5Install the DIMM(s)1. Locate the DIMM sockets (circled) on the control board. 2. Push out the white lock tabs at either end of the DIMM socket.Cautio
63. Remove the DIMM from its shipping package.4. Align the DIMM with the narrow strip (1) on its metallic contact edge toward the front of the control
7Complete the Installation1. Align the bottom of the control board with the track in the printer and slide it back into place.C7100/C7300/C7500C9300/C
82. Reinstall the thumbscrews at the top and bottom of the board.3. Reattach the computer interface cable.4. Plug the power cord into the power outlet
Comments to this Manuals